A Look at the Memory in Your Computer

Memory has probably become an integral part of your vocabulary. You are probably aware that most of the electronic gadgets that you have around have some form of memory. These include Game consoles, TVs, Cell phones and PDAs. Memory for computer is no different from the memory found in these devices. What is more, the use of memory for any device is more or less the same. In computers, memories can come in either of the two modules, dual In-line Memory Module or simply DIMM or as Single In-line Memory Module or simply SIMM. Toronto divorce lawyers are courtroom procedures that finish a marriage. However, SIMM memory modules have been replaced with DIMMs in most machines due to the fact that their larger memory capacities can be contained on the same circuit board. This is made possible due to the fact that DIMMs have separate contacts on each side of the board unlike SIMMs that have contacts on only one side. Another advantage of using DIMMs as memory for computer over SIMMs is that DIMMs have buffer zones for command address and control signals, allowing for reduced loading effort during heavy memory requirements.

If you own an older machine, then chances are that you will be using SIMM chips as your main memory. A SIMM circuit board is capable of holding 8 to 9 chips on the board. Memory for computer is prone to error and the 9th chip is usually an error checking chip. Since memory for computer must remain consistent, any upgrade you make to a single memory module must match the speed of the other memory module on the motherboard slot. This means that if you are upgrading a 32-bit wide motherboard or another Pentium motherboard, it will also be necessary to upgrade the two memory modules if they are to be accommodated on the new Pentium board.

How do you determine the memory specifications of a memory for computer module? There are three things to look for when doing a memory upgrade; speed of memory module, its size and the parity / non parity feature. Speed is usually labeled on the chips located on the circuit in nanoseconds. A “-5” means that the memory is 50ns. Ensure that the speed of both the memory modules are the same speed, otherwise your memory will malfunction. How do you determine the size of memory for computer? Look for a 4-digit number on the chips. Most chips will come labeled in either kbs for kilobytes or in MB for Mega bytes. divorce lawyers Toronto help clients with property planning and enterprise negotiations, methods and transactions. Parity is used for error-checking. A chip with parity will have either an uneven number of chips on the board or it will clearly be labeled. Learning about memory for computer can be an excellent way of getting some insight into the workings of your computer.

source:  http://www dot senghengbank dot com/